合并 main 的合并前复核修复到镜牢选队分支

Browse Source
分支从 8a9495b 分出,缺 main 上 a74fda0 的急停与驱动复核修复。
两边都保留,不取单边:

- 急停:沿用分支的 GetAsyncKeyState 轮询与 End 键(pynput 钩子在该
  机器收不到键,F12 是 Steam 截图键);移植 main 的 on_stop 释放驱动
  按住的鼠标键、250 毫秒强退兜底、listening() 管理监听生命周期。
  按键状态改为独立绑定(SHORT 返回值),接口不可用时启动即报告。
- 驱动输入:同时保留句柄级前台校验、press_ms/settle 与 main 的
  停止标志、输入锁和按键记录;点击经 down()/up() 以便急停释放。
  前台校验改用本模块的类型化 _api 绑定。
- 代理每次点击按当前句柄重新 bind_window:代理复用时不再拿安装时
  的旧句柄拒绝游戏重启后的全部点击。
- aalc_task:listening() 包住整个任务,内部安装两个选队补丁。
- 分支新增测试改为替换模块接口,不再直接 patch ctypes.windll
  (Linux 上 9 项报错);README 急停键改为 End。

验证:Linux / Python 3.12 全套 474 项通过;git diff --check 通过。
Windows 热键、驱动和选队仍需实机回归。

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
yws
2026-11-14 03:19:53 +00:00
co-authored by Claude Opus 5.5
14 changed files with 490 additions and 182 deletions
+10
View File
@@ -98,6 +98,15 @@ $env:LCP_DRIVER_TRACE = "$env:USERPROFILE\lc_mcp\driver-input.log"
模拟器不接管;拖拽、滚动、键盘以及 MCP 的独立 `click` 工具仍使用原后端。
当前回归验证覆盖软件接线和异常处理,DLL、实际驱动及游戏响应需在 Windows 实机核验。
任务运行期间按 **End** 急停,可用 `LCP_KILL_KEY` 改成 `pause`、`scrolllock` 等键名。
不要用 F12(Steam 截图键);监听用 `GetAsyncKeyState` 轮询,因为 pynput 钩子在该机器的会话里收不到按键。
急停会终止任务子进程,保留游戏窗口;`task_status` 返回 `stopped`、退出码 `130`。
刷取循环检测到用户停止后结束本轮,不再导航、升级或重试。急停前会尝试释放驱动
按住的鼠标按钮,清理超过 250 毫秒仍强制退出;硬退出留下的临时配置恢复文件由
`stop_task` 或下一次 `run_task` 处理。热键监听依赖 AALC 的 `pynput`,安装失败会写日志;
也可从 MCP 调用 `stop_task`,或按 Ctrl+Alt+Del 打开任务管理器终止任务进程。
此热键只覆盖 `run_task` 子进程,不覆盖独立运行的合成、升级脚本。
## 工具
| 工具 | 说明 |
@@ -180,6 +189,7 @@ powershell -ExecutionPolicy Bypass -File scripts\install_convert_task.ps1 -Every
| `LCP_PORT` | 8765 | 服务/bridge 端口 |
| `LCP_KEEP_SHOTS` | 30 | 截图保留张数 |
| `LCP_ALLOW_LUNACY` | 未设置 | 设为 `1` 时允许预检放行 `set_lunacy_to_enkephalin` 不为 0 的配置 |
| `LCP_KILL_KEY` | `end` | 任务子进程的急停键,如 `pause` / `scrolllock`;认不出的键名会报错而不是换成默认键 |
| `LC_PY` | 当前解释器 | `levelup.py`/`auto_cycle.py` 调用 MCP 用的 Python |
## 开发 / 测试
-2
View File
@@ -228,5 +228,3 @@ Get-ChildItem "$dir\convert_*.json" | ForEach-Object {
if ($m -and $m.secs -eq $r.elapsed_s) { "OK $($r.started)" } else { "MISMATCH $($_.Name)" }
}
```
+32
View File
@@ -96,3 +96,35 @@ OCR 误读;已知读法集合只来自该账号历史观测,不是通用余
测试从 vendor AST 提取并执行真实的 `init_input`、交互门与监控点击方法, 不复制其接线逻辑;
实际 `aalc_task.run` 的 `all` / `daily` 入口也有覆盖。Windows DLL 和游戏未在本次环境执行。
PrintWindow 探测仅表示 API 调用成功, 不保证像素内容有效; 真机仍需检查画面、焦点和点击响应。
## 合入 main 前的复核与急停补齐
合并目标为 `main`(原 `073e407`),来源为
`codex/feedback-unattended-setup-20261004`。本轮拉取又发现 `8a9495b`:
它是一个新增 F12 急停的提交,涉及三个文件,也纳入本次合并。
复核覆盖分支相对 main 的运行时、脚本、安装配置和测试变更,结合上述两轮审查记录;
AALC 子模块保持已验证的 `e1d1749`,没有追入 develop 的图标提交。
合并前另修复以下问题:
- 急停回调先写日志,日志抛错会跳过退出,日志阻塞也会延迟急停。
回调改为分发退出工作,不写日志;清理另有 250 毫秒强退兜底。
这遵循 [pynput 对 Windows 键盘回调的说明](https://pynput.readthedocs.io/en/latest/keyboard.html#the-keyboard-listener-thread):避免在回调中阻塞。
- 硬退出跳过驱动点击的 finally,可能留下按住的鼠标按钮。
驱动增加停止标志及输入锁,急停先拒绝新鼠标输入,再释放本实例按住的按钮。
驱动本身卡住时仍按时退出;本次离线验证不证明硬件故障下必定释放成功。
- `killswitch.stop` 原先未接到任务退出路径;现在正常结束、异常和预检拒绝都会关闭监听器。
- 退出码 130 原先显示 failed,镜牢轮询后还会继续导航和升级。
现在状态为 stopped,刷取脚本终止整轮并写入用户停止报告,不重试、不继续升级。
- 计划任务时限仍按 75 分钟镜牢设置,短于脚本的 100 分钟上限,也未覆盖一次卡死重试。
安装脚本改为 daily 45 分钟、每局镜牢 100 分钟、各至多两次尝试,另加 30 分钟收尾预算。
此改动只影响后续安装任务,未操作现有 Windows 计划任务。
- 纠正合成安装脚本关于注销后运行和固定体力恢复速率的过时注释,清理文档尾部空行。
验证:Linux / Python 3.12 全套 **437 项通过**(17.112 秒);相对 main 的
`git diff --check` 通过。新增回归涵盖真正退出 130 的子进程、保留恢复文件、用户停止后
不继续操作、驱动按住时急停、清理卡住仍退出以及正常/预检拒绝后的监听器清理。
Windows 热键、驱动及 PowerShell 计划任务仍需实机验收。
分支清理仅针对完整合入 main 的来源分支。`fix/team-scroll-patch` 仍有独有的
`dd4259d` 实验提交,本次不合入也不删除;其历史取舍见上面的 DSH 审查记录。
+11 -2
View File
@@ -182,6 +182,10 @@ class DriverClickProxy:
handle.setForeground()
if foreground_window() != hwnd:
raise OSError('无法激活游戏窗口, 未发送驱动输入')
# 游戏重启后句柄会变; 每次按当前句柄重新绑定, 免得前台校验拿旧句柄拒绝所有点击。
bind = getattr(self._driver, 'bind_window', None)
if bind is not None:
bind(hwnd)
return client_to_screen(hwnd, x, y)
def _trace(self, msg):
@@ -228,8 +232,7 @@ class DriverClickProxy:
sx, sy = self._screen_pos(x, y)
if not self._driver.move_to(sx, sy):
return False
self._driver.down(1)
return True
return self._driver.down(1) is not False
def mouse_up(self, x, y):
try:
@@ -282,6 +285,12 @@ def install_driver_click(auto, screen, driver=None, log=print):
return drv
def stop_driver_click(auto):
handler = auto.input_handler
if isinstance(handler, DriverClickProxy):
handler._driver.emergency_stop()
@contextmanager
def driver_click_tasks(scheme, auto, screen, cfg, log=print):
"""每次游戏初始化完成后接管, 包括 all 任务和故障重启。"""
+46 -50
View File
@@ -9,12 +9,11 @@ import json
import os
import sys
from . import preflight
from . import killswitch, preflight
from .aalc_engine import bootstrap
from . import killswitch
from .aalc_patches import (WindowGuard, driver_click_tasks, install_default_battle_team,
install_exact_team_match, install_robust_set_foreground,
install_system_team_selection)
install_system_team_selection, stop_driver_click)
# 任务 -> {参数名: AALC 配置项}; 参数只在本次运行内生效
TASKS = {
@@ -77,55 +76,52 @@ def run(task, params):
from tasks.battle import battle
from utils.path_manager import path_manager
# 急停热键: 装得越早越好。驱动级点击期间鼠标被人和程序抢来抢去,
# 用户没法用鼠标点停止按钮, 键盘是唯一可靠的中断手段。
kill_listener = killswitch.install(log=log)
with killswitch.listening(log=log, on_stop=lambda: stop_driver_click(auto)):
problems = preflight.check(preflight.collect(cfg), task,
desktop=None if cfg.simulator else preflight.desktop_size())
if problems:
for p in problems:
log('[ERROR] [lc_mcp] preflight: %s' % p)
return PREFLIGHT_EXIT
problems = preflight.check(preflight.collect(cfg), task,
desktop=None if cfg.simulator else preflight.desktop_size())
if problems:
for p in problems:
log('[ERROR] [lc_mcp] preflight: %s' % p)
return PREFLIGHT_EXIT
install_exact_team_match(auto, log)
install_robust_set_foreground(screen, log=log)
# 日常本(经验/纽本)不翻队伍列表: 队伍是自定义名字时按名字找必然失败,
# 白等 60 秒还会把界面滚乱, 后面 to_battle 就找不到 "进入战斗" 了。
if task in ('daily', 'all'):
install_default_battle_team(scheme, log=log)
# 镜牢: 编队是自定义名字(体系名), AALC 只会找 "编队#N"; 改成按体系名点选。
if task in ('mirror', 'all'):
install_system_team_selection(log=log)
guard = WindowGuard(screen, cfg, log=log)
guard.start()
restore_path = os.environ.get(RESTORE_ENV)
originals = apply_overrides(cfg, task, params, restore_path)
with driver_click_tasks(scheme, auto, screen, cfg, log=log):
try:
if task == 'all':
scheme.script_task()
install_exact_team_match(auto, log)
install_robust_set_foreground(screen, log=log)
# 日常本(经验/纽本)不翻队伍列表: 队伍是自定义名字时按名字找必然失败,
# 白等 60 秒还会把界面滚乱, 后面 to_battle 就找不到 "进入战斗" 了。
if task in ('daily', 'all'):
install_default_battle_team(scheme, log=log)
# 镜牢: 编队是自定义名字(体系名), AALC 只会找 "编队#N"; 改成按体系名点选。
if task in ('mirror', 'all'):
install_system_team_selection(log=log)
guard = WindowGuard(screen, cfg, log=log)
guard.start()
restore_path = os.environ.get(RESTORE_ENV)
originals = apply_overrides(cfg, task, params, restore_path)
with driver_click_tasks(scheme, auto, screen, cfg, log=log):
try:
if task == 'all':
scheme.script_task()
return 0
# 与 script_task() 相同的前置步骤
scheme.init_game()
path_manager.initialize_paths()
auto.clear_img_cache()
retry_monitor.start()
get_reward = None
if auto.click_element('battle/turn_assets.png', take_screenshot=True):
print('[lc_mcp] 检测到正在战斗, 先打完', flush=True)
get_reward = battle.fight()
{
'daily': scheme.Daily_task_wrapper(get_reward=get_reward),
'reward': scheme.to_get_reward,
'enkephalin': scheme.Buy_enkephalin,
'mirror': scheme.Mirror_task,
}[task]()
return 0
# 与 script_task() 相同的前置步骤
scheme.init_game()
path_manager.initialize_paths()
auto.clear_img_cache()
retry_monitor.start()
get_reward = None
if auto.click_element('battle/turn_assets.png', take_screenshot=True):
print('[lc_mcp] 检测到正在战斗, 先打完', flush=True)
get_reward = battle.fight()
{
'daily': scheme.Daily_task_wrapper(get_reward=get_reward),
'reward': scheme.to_get_reward,
'enkephalin': scheme.Buy_enkephalin,
'mirror': scheme.Mirror_task,
}[task]()
return 0
finally:
guard.stop()
retry_monitor.stop()
restore(cfg, originals, restore_path)
finally:
guard.stop()
retry_monitor.stop()
restore(cfg, originals, restore_path)
def main(argv):
+48 -22
View File
@@ -22,6 +22,7 @@
import ctypes
import os
import time
import threading
from ctypes import wintypes
from functools import lru_cache
@@ -60,6 +61,14 @@ def foreground_window():
return _api('user32', 'GetForegroundWindow', wintypes.HWND, [])()
def window_title(hwnd, limit=64):
"""窗口标题, 只用于报错说明; 取不到返回空串。"""
buf = ctypes.create_unicode_buffer(limit)
_api('user32', 'GetWindowTextW', ctypes.c_int,
[wintypes.HWND, wintypes.LPWSTR, ctypes.c_int])(hwnd, buf, limit)
return buf.value
def is_console_session():
current = wintypes.DWORD()
query = _api('kernel32', 'ProcessIdToSessionId', wintypes.BOOL,
@@ -106,6 +115,9 @@ class DriverInput:
self.log = log
self._dll = None
self._open = False
self._stopped = False
self._input_lock = threading.RLock()
self._pressed = set()
# 目标窗口句柄。有它才能做句柄级前台校验 —— 几何校验在窗口重叠时没用:
# 实测把浏览器切到前台, 点游戏里同一个坐标, 只比矩形的话校验照样通过。
self.hwnd = 0
@@ -139,7 +151,14 @@ class DriverInput:
@property
def ready(self):
return self._open and self._dll is not None
return self._open and self._dll is not None and not self._stopped
def emergency_stop(self):
"""拒绝后续鼠标输入并释放本实例按住的按钮。急停线程另有退出超时。"""
self._stopped = True
with self._input_lock:
for button in tuple(self._pressed):
self.up(button)
def preflight(self):
"""返回 (能否用, 原因)。用之前调一次, 把不能用的原因说清楚。"""
@@ -160,12 +179,13 @@ class DriverInput:
# ---------------------------------------------------------------- 移动
def move_relative(self, dx, dy):
if not self.ready:
return False
if dx == 0 and dy == 0:
with self._input_lock:
if not self.ready:
return False
if dx == 0 and dy == 0:
return True
self._dll.moveR(int(dx), int(dy), True)
return True
self._dll.moveR(int(dx), int(dy), True)
return True
def move_to(self, sx, sy, tol=1, iters=10, settle=0.03):
"""把光标精确移到屏幕坐标 (sx, sy)。返回是否到位。"""
@@ -185,12 +205,19 @@ class DriverInput:
# ---------------------------------------------------------------- 按键
def down(self, button=1):
if self.ready:
self._dll.mouse_down(int(button))
with self._input_lock:
if not self.ready:
return False
button = int(button)
self._pressed.add(button)
self._dll.mouse_down(button)
return True
def up(self, button=1):
if self.ready:
self._dll.mouse_up(int(button))
with self._input_lock:
if self._open and self._dll is not None:
self._dll.mouse_up(int(button))
self._pressed.discard(int(button))
def click(self, sx, sy, times=1, tol=1, require_foreground=True,
press_ms=60, settle=0.05):
@@ -222,11 +249,12 @@ class DriverInput:
time.sleep(settle)
for _ in range(int(times)):
try:
self._dll.mouse_down(1)
if not self.down(1):
return False
time.sleep(press_ms / 1000.0)
finally:
self._dll.mouse_up(1)
return True
self.up(1)
return not self._stopped
def key_down(self, key):
if self.ready:
@@ -254,22 +282,20 @@ def click_point_is_on_foreground(sx, sy, hwnd=None):
所以: 给了 hwnd 就要求前台窗口**就是它**(或是它的子窗口); 没给 hwnd 时
退化成"有前台窗口且点在它矩形内", 可用性有限, 仅作兜底。
"""
user32 = ctypes.windll.user32
fg = user32.GetForegroundWindow()
fg = foreground_window()
if not fg:
return False, '当前没有前台窗口(GetForegroundWindow=0)'
if hwnd:
if fg == hwnd or user32.IsChild(hwnd, fg):
if fg == hwnd or _api('user32', 'IsChild', wintypes.BOOL,
[wintypes.HWND, wintypes.HWND])(hwnd, fg):
return True, 'ok'
buf = ctypes.create_unicode_buffer(64)
user32.GetWindowTextW(fg, buf, 64)
other = ctypes.create_unicode_buffer(64)
user32.GetWindowTextW(hwnd, other, 64)
return False, ('前台不是目标窗口(前台=%r, 目标=%r) —— 这次点击会打到别的窗口'
% (buf.value, other.value))
% (window_title(fg), window_title(hwnd)))
pt = wintypes.POINT(int(sx), int(sy))
rect = wintypes.RECT()
if not user32.GetWindowRect(fg, ctypes.byref(rect)):
get_rect = _api('user32', 'GetWindowRect', wintypes.BOOL,
[wintypes.HWND, ctypes.POINTER(wintypes.RECT)])
if not get_rect(fg, ctypes.byref(rect)):
return False, '取不到前台窗口的区域'
if not (rect.left <= pt.x < rect.right and rect.top <= pt.y < rect.bottom):
return False, ('点击点(%d,%d)不在前台窗口内(区域 %d,%d-%d,%d)'
+78 -21
View File
@@ -18,19 +18,25 @@
默认 End(小键盘区右下角, 好按且不冲突), 可用环境变量 LCP_KILL_KEY 改成 pause / scrolllock / f11 等。
⛔ 不要用 F12: 那是 Steam 的截图键(用户 2026-10-22 指出), 按下去会弹 Steam 截图
覆盖层, 而且可能被 Steam 抢先消费。Esc / F11 也不合适 —— 游戏里分别是关菜单
和切全屏。Pause 没有任何软件抢, 是最稳的选择。
按下后直接 os._exit —— 任务本来就是子进程, 硬退出不留锁或半截状态, 这与
aalc_task.py "停止 = 杀进程树" 的设计前提一致。监听器活在任务进程内,
所以即使 MCP 服务出问题、用户联系不上调用方, 按热键仍然能停。
和切全屏。
按下后终止任务子进程, 游戏保留。硬退出不会执行任务的 finally; 临时配置由
TaskRunner 的恢复文件机制处理。退出前先给驱动释放按住的鼠标键(on_stop),
清理或日志卡住时 STOP_TIMEOUT 后仍强制退出。监听器活在任务进程内, 所以即使
MCP 服务出问题、用户联系不上调用方, 按热键仍然能停。
"""
import ctypes
import os
import threading
import time
from contextlib import contextmanager
from functools import lru_cache
DEFAULT_KEY = 'end'
EXIT_CODE = 130 # 与 SIGINT 一致, 便于上层识别"被用户中止"
POLL_INTERVAL = 0.05 # 50ms 轮询, 人手按一下不会漏
STOP_TIMEOUT = 0.25 # 释放鼠标/写日志最多等这么久, 然后强退
START_DELAY = 0.3 # 先等一会儿, 避免把启动时按住的键当成急停
# 常用键 -> 虚拟键码。f12 保留是为了兼容旧配置, 但**不推荐** —— Steam 占用它。
VK = {
@@ -51,18 +57,28 @@ def resolve_vk(key):
return VK.get(name)
@lru_cache(maxsize=None)
def _key_state_api():
"""独立绑定 GetAsyncKeyState, 不改共用的 ctypes.windll 的类型声明。"""
fn = ctypes.WinDLL('user32', use_last_error=True).GetAsyncKeyState
fn.argtypes = [ctypes.c_int]
fn.restype = ctypes.c_short
return fn
def _pressed(vk):
"""GetAsyncKeyState 的最高位 = 当前是否按下。"""
return bool(ctypes.windll.user32.GetAsyncKeyState(vk) & 0x8000)
"""GetAsyncKeyState 的最高位 = 当前是否按下(低位只表示"按过", 不算)。"""
return bool(_key_state_api()(vk) & 0x8000)
class KillSwitch:
"""轮询线程。按住热键会立刻退出, 不会重复触发。"""
def __init__(self, vk, log=print, key_name=DEFAULT_KEY):
def __init__(self, vk, log=print, key_name=DEFAULT_KEY, on_stop=None):
self.vk = vk
self.log = log
self.key_name = key_name
self.on_stop = on_stop
self.fired = False
self._stopped = threading.Event()
self._thread = threading.Thread(target=self._run, daemon=True,
@@ -79,28 +95,54 @@ class KillSwitch:
self._stopped.set()
def _run(self):
# 先等一会儿, 避免把启动时按住的键当成急停
time.sleep(0.3)
if self._stopped.wait(START_DELAY):
return
while not self._stopped.is_set():
if _pressed(self.vk):
try:
pressed = _pressed(self.vk)
except Exception as e: # 接口失效: 说清楚后退出, 不刷满异常
try:
self.log('[lc_mcp] 急停热键失效(%s: %s), 请用 stop_task 或 Ctrl+Alt+Del 停止'
% (type(e).__name__, e))
except Exception:
pass
return
if pressed:
self._fire()
return
time.sleep(POLL_INTERVAL)
self._stopped.wait(POLL_INTERVAL)
def _fire(self):
if self.fired:
return
self.fired = True
# 释放驱动按键或写日志卡住时, 由计时器按时强退。
timer = threading.Timer(STOP_TIMEOUT, os._exit, args=(EXIT_CODE,))
timer.daemon = True
try:
self.log('[lc_mcp] ⛔ 急停热键 %s 被按下, 立即终止任务'
% self.key_name.upper())
self.log('[lc_mcp] 游戏窗口会保留, 可用 run_task 重新开始')
timer.start()
try:
if self.on_stop is not None:
self.on_stop()
except Exception:
pass # 释放失败也必须退出
try:
self.log('[lc_mcp] ⛔ 急停热键 %s 被按下, 终止任务; 游戏窗口保留, 可用 run_task 重新开始'
% self.key_name.upper())
except Exception:
pass # 日志坏了不能拦住急停
finally:
os._exit(EXIT_CODE)
try:
os._exit(EXIT_CODE)
finally:
timer.cancel() # 仅在测试替换 _exit 时才会走到
def install(log=print, key=None):
"""启动急停轮询线程。返回 KillSwitch, 失败返回 None(不抛异常)。"""
def install(log=print, key=None, on_stop=None):
"""启动急停轮询线程。返回 KillSwitch, 失败返回 None(不抛异常)。
急停装不上不该让任务起不来, 但必须把原因和应急手段说清楚。
"""
key = key or os.environ.get('LCP_KILL_KEY') or DEFAULT_KEY
vk = resolve_vk(key)
if vk is None:
@@ -108,21 +150,36 @@ def install(log=print, key=None):
% (key, ', '.join(sorted(VK))))
return None
try:
switch = KillSwitch(vk, log=log, key_name=key).start()
_key_state_api()
except Exception as e: # 非 Windows / user32 不可用
log('[lc_mcp] 急停热键不可用(读取键盘状态失败: %s: %s), 请用 Ctrl+Alt+Del 强制停止'
% (type(e).__name__, e))
return None
try:
switch = KillSwitch(vk, log=log, key_name=key, on_stop=on_stop).start()
except Exception as e:
log('[lc_mcp] 急停热键启动失败(%s: %s), 请用 Ctrl+Alt+Del 强制停止'
% (type(e).__name__, e))
return None
log('[lc_mcp] 急停热键已就绪: 按 %s 立即停止任务(键盘可用, 不需要鼠标, '
'也不依赖 MCP 服务)' % key.upper())
log('[lc_mcp] 急停热键已就绪: 按 %s 终止任务, 游戏窗口保留; 可用 run_task 重新开始'
'(键盘可用, 不需要鼠标, 也不依赖 MCP 服务)' % key.upper())
return switch
def stop(switch):
"""停止轮询(任务正常结束时调用)。"""
"""停止轮询(任务结束时调用, 免得线程残留)。"""
if switch is None:
return
try:
switch.stop()
except Exception:
pass
@contextmanager
def listening(log=print, on_stop=None):
switch = install(log=log, on_stop=on_stop)
try:
yield switch
finally:
stop(switch)
+3 -1
View File
@@ -12,6 +12,7 @@ import time
from collections import deque
from .aalc_task import RESTORE_ENV
from .killswitch import EXIT_CODE as USER_ABORT_EXIT
REPO = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
IS_WIN = sys.platform.startswith('win')
@@ -186,7 +187,8 @@ class TaskRunner:
state = 'running'
else:
self.info.setdefault('ended', time.time())
state = 'stopped' if self.info['stopped_by_user'] else 'succeeded' if code == 0 else 'failed'
state = ('stopped' if self.info['stopped_by_user'] or code == USER_ABORT_EXIT
else 'succeeded' if code == 0 else 'failed')
r = {'ok': True, 'state': state, 'task': self.info['task'], 'params': self.info['params'],
'elapsed_s': int((self.info.get('ended') or time.time()) - self.info['started']),
'log': self.info['log'], 'log_tail': tail(self.info['log'], max(1, min(int(lines), 200)))}
+9
View File
@@ -42,6 +42,10 @@ DEFAULT_REPORT_DIR = os.path.expanduser(os.path.join('~', 'lc_mcp', 'cycles'))
_log_file = None
class UserAborted(RuntimeError):
"""用户主动停止, 结束整轮, 不执行后续导航、升级或重试。"""
def log(msg):
line = '[%s] %s' % (time.strftime('%H:%M:%S'), msg)
print(line, flush=True)
@@ -176,6 +180,8 @@ def poll_task(task, timeout_s, sleep=time.sleep):
raise RuntimeError('无法读取任务状态: %s' % st.get('error', st))
s = st.get('state')
el = int(time.time() - t0)
if s == 'stopped' or st.get('exit_code') == 130:
raise UserAborted('%s 已被用户停止' % task)
if s != 'running':
log('%s 结束: state=%s elapsed=%ds exit=%s' % (task, s, el, st.get('exit_code')))
# AALC 单次战斗失败后仍会 exit 0, succeeded 还要看 errors
@@ -332,6 +338,9 @@ def main(argv=None):
try:
return run_cycle(args, step, finish)
except UserAborted as e:
step('用户停止', False, str(e))
return finish(130, '本轮已由用户停止')
except (OSError, RuntimeError, subprocess.SubprocessError) as e:
if isinstance(e, subprocess.CalledProcessError):
output = (e.stdout or '') + (e.stderr or '')
+3 -9
View File
@@ -5,14 +5,8 @@
# powershell -ExecutionPolicy Bypass -File scripts\install_convert_task.ps1 -EveryHours 6
# powershell -ExecutionPolicy Bypass -File scripts\install_convert_task.ps1 -Uninstall
#
# 节奏怎么定(体力恢复速度):
# Limbus 的体力每 6 分钟回 1 点, 上限 126。
# 合成 1 个模块要 20 点体力, 所以:
# 每 2 小时 -> 约 20 点 -> 1 个模块
# 每 4 小时 -> 约 40 点 -> 2 个模块(默认)
# 每 6 小时 -> 约 60 点 -> 3 个模块
# 只要不顶到 126 上限就不浪费恢复量, 所以更勤快些也不会亏。
# 4 小时是"每次都能换到东西"和"别老折腾游戏启动"之间的折中。
# 默认每 4 小时检查一次; 是否合成以本轮实际体力读数为准, 不按固定恢复速率推算。
# 合成 1 个模块需要 20 点体力。
#
# 这个任务和 LcMCPDailyCycle 是分开的: 用户明确要求这次不打任何关卡,
# 只挂机攒模块, 所以不能把刷取任务一起打开。
@@ -42,7 +36,7 @@ if (-not (Test-Path $script)) {
throw "找不到脚本: $script"
}
# 以当前用户运行。无人值守要点: 不要勾"只在用户登录时运行", 否则注销后不跑。
# 以当前用户的交互会话运行, 必须保持登录; 注销后没有可供截图/点击的游戏桌面。
$principal = New-ScheduledTaskPrincipal -UserId "$env:USERDOMAIN\$env:USERNAME" `
-LogonType Interactive -RunLevel Limited
+4 -3
View File
@@ -6,7 +6,7 @@
# powershell -ExecutionPolicy Bypass -File scripts\install_unattended.ps1
# 可选: -At 05:30 每日运行时间。游戏每日重置为 06:00 (KST), 即北京时间 05:00
# -EveryHours 2.5 改成"每 N 小时重复一轮"以持续刷取; 0 = 只按 -At 每天一次
# 单轮上限 = 60 + 75*Mirror 分钟, 间隔要大于它, 否则会被跳过
# 任务时限包含 daily 45 分钟、每局镜牢 100 分钟、各一次重试及 30 分钟收尾
# -Mirror 1 每轮镜牢局数, 0 = 不打镜牢
# -Target 34 把队内人格升到的等级
# -Python <路径> 默认 vendor\aalc\.venv\Scripts\pythonw.exe (无窗口, 不抢游戏焦点)
@@ -66,8 +66,9 @@ if (-not $NoWatchdog) {
$cycle = Join-Path $PSScriptRoot "auto_cycle.py"
$action = New-ScheduledTaskAction -Execute $Python -WorkingDirectory $Repo `
-Argument "-X utf8 `"$cycle`" --mirror $Mirror --target $Target"
# 一轮 daily 约 22 分钟, 每局镜牢实测 39~>70 分钟; 超过上限由计划任务强杀
$limit = New-TimeSpan -Minutes (60 + 75 * [Math]::Max($Mirror, 0))
# 与 auto_cycle.py 的 DAILY_TIMEOUT_S / MIRROR_TIMEOUT_S / STALL_RETRIES 对齐。
# 每个任务最多两次尝试, 另留 30 分钟给启动、轮询和升级; 避免外层先杀掉报告进程。
$limit = New-TimeSpan -Minutes (30 + 2 * (45 + 100 * [Math]::Max($Mirror, 0)))
if ($EveryHours -gt 0) {
# 持续刷取: 每 N 小时重复一轮。开始时间取"现在", 装完即进入节奏。
# 注意 New-TimeSpan -Hours 的参数是 [int], 传 2.5 会被截断成 2 小时, 所以用 -Minutes。
+29
View File
@@ -164,6 +164,35 @@ class RunAalcTest(unittest.TestCase):
self.assertIn('preflight', info)
self.assertEqual(self.tools(mcp), ['run_task'])
def test_user_stop_never_retries(self):
for status in ({'state': 'stopped', 'exit_code': 130},
{'state': 'stopped'}, {'state': 'failed', 'exit_code': 130}):
mcp = FakeMcp([status], [DONE])
with self.subTest(status=status), self.assertRaises(auto_cycle.UserAborted):
self.run_aalc(mcp)
self.assertEqual(self.tools(mcp), ['run_task'])
def test_mirror_emergency_stop_ends_cycle_before_upgrade_or_navigation(self):
mcp = FakeMcp([DONE], [{'state': 'stopped', 'exit_code': 130}])
poll = auto_cycle.poll_task
with tempfile.TemporaryDirectory() as tmp:
with mock.patch.object(auto_cycle, 'probe', mcp.probe), \
mock.patch.object(auto_cycle, 'poll_task',
side_effect=lambda t, s, **kw: poll(t, s, sleep=lambda _: None)), \
mock.patch.object(auto_cycle, 'lunacy_guard', return_value=(True, 'ok')), \
mock.patch.object(auto_cycle, 'ensure_team1', return_value=True), \
mock.patch.object(auto_cycle, 'goto_identities') as navigate, \
mock.patch.object(auto_cycle, 'run') as upgrade, \
mock.patch('builtins.print'):
code = auto_cycle.main(['--mirror', '1', '--report-dir', tmp])
report = json.loads(next(Path(tmp).glob('cycle_*.json')).read_text(encoding='utf-8'))
self.assertEqual(code, 130)
self.assertFalse(report['ok'])
self.assertIn('用户停止', report['result'])
navigate.assert_not_called()
upgrade.assert_not_called()
self.assertEqual(self.tools(mcp), ['run_task', 'run_task'])
def test_exit_zero_with_errors_is_failure(self):
mcp = FakeMcp([dict(DONE, errors=['[ERROR] 超出最大尝试次数,未能进入战斗'])])
ok, info = self.run_aalc(mcp)
+72 -40
View File
@@ -301,8 +301,8 @@ class DriverWiringTest(unittest.TestCase):
def test_actual_task_entry_enables_driver_for_all_and_daily(self):
from lc_mcp import aalc_task
for task in ('all', 'daily'):
with self.subTest(task=task):
for task, problems in [('all', []), ('daily', []), ('all', ['invalid config'])]:
with self.subTest(task=task, problems=problems):
auto, handler_type = vendor_auto()
auto.clear_img_cache = mock.Mock()
auto.click_element = mock.Mock(return_value=False)
@@ -329,14 +329,21 @@ class DriverWiringTest(unittest.TestCase):
mock.patch.object(aalc_task, 'install_exact_team_match'), \
mock.patch.object(aalc_task, 'install_robust_set_foreground'), \
mock.patch.object(aalc_task, 'WindowGuard'), \
mock.patch.object(aalc_task.killswitch, 'install') as install_hotkey, \
mock.patch.object(aalc_task, 'log'), \
mock.patch.object(aalc_task.preflight, 'collect', return_value={}), \
mock.patch.object(aalc_task.preflight, 'desktop_size', return_value=(1920, 1080)), \
mock.patch.object(aalc_task.preflight, 'check', return_value=[]), \
mock.patch.object(aalc_task.preflight, 'check', return_value=problems), \
mock.patch.object(di, 'DriverInput', return_value=drv), \
mock.patch.object(ap.DriverClickProxy, '_screen_pos', return_value=(10, 20)):
self.assertEqual(aalc_task.run(task, {}), 0)
drv.click.assert_called_once_with(10, 20, times=1)
self.assertEqual(aalc_task.run(task, {}), 3 if problems else 0)
install_hotkey.return_value.stop.assert_called_once()
if problems:
drv.click.assert_not_called()
else:
drv.click.assert_called_once_with(10, 20, times=1)
install_hotkey.call_args.kwargs['on_stop']()
drv.emergency_stop.assert_called_once()
def test_disabled_and_simulator_leave_initialization_unchanged(self):
for enabled, simulator in [('0', False), ('1', True)]:
@@ -350,6 +357,23 @@ class DriverWiringTest(unittest.TestCase):
class DriverFailureTest(unittest.TestCase):
def test_emergency_stop_releases_press_and_blocks_subsequent_clicks(self):
drv = di.DriverInput()
drv._open, drv._dll = True, mock.Mock()
with mock.patch.object(drv, 'move_to', return_value=True), \
mock.patch.object(di, 'click_point_is_on_foreground', lambda *a, **k: (True, 'ok')), \
mock.patch.object(di.time, 'sleep', side_effect=lambda _: drv.emergency_stop()):
# settle=0: 第一次 sleep 是按下后的按住时长, 急停发生在按住期间
self.assertFalse(drv.click(10, 20, times=3, settle=0))
drv._dll.mouse_down.assert_called_once_with(1)
drv._dll.mouse_up.assert_called_with(1)
self.assertFalse(drv.ready)
self.assertFalse(drv.click(30, 40))
self.assertFalse(drv.move_relative(20, 30))
self.assertFalse(drv.down())
drv._dll.moveR.assert_not_called()
self.assertEqual(drv._pressed, set())
def test_release_even_if_sleep_is_interrupted(self):
drv = di.DriverInput()
drv._open, drv._dll = True, mock.Mock()
@@ -437,8 +461,18 @@ class ForegroundFallbackTest(unittest.TestCase):
[mock.call(33, 11, True), mock.call(33, 11, False)])
if __name__ == '__main__':
unittest.main()
def win_api(**functions):
"""按 API 名替换 driver_input._api 返回的函数。"""
return mock.patch.object(di, '_api', side_effect=lambda library, name, result, args: functions[name])
def window_rect(left, top, right, bottom):
def get_window_rect(hwnd, ptr):
r = ptr._obj
r.left, r.top, r.right, r.bottom = left, top, right, bottom
return 1
return get_window_rect
class ForegroundCheckTest(unittest.TestCase):
@@ -455,37 +489,21 @@ class ForegroundCheckTest(unittest.TestCase):
return d
def test_rejects_when_no_foreground_window(self):
with mock.patch.object(di.ctypes.windll.user32, 'GetForegroundWindow',
return_value=0):
with mock.patch.object(di, 'foreground_window', return_value=None):
ok, why = di.click_point_is_on_foreground(100, 100)
self.assertFalse(ok)
self.assertIn('前台窗口', why)
def test_rejects_when_point_outside_foreground_window(self):
def fake_get_window_rect(hwnd, ptr):
r = ptr._obj
r.left, r.top, r.right, r.bottom = 0, 0, 50, 50
return 1
with mock.patch.object(di.ctypes.windll.user32, 'GetForegroundWindow',
return_value=12345), \
mock.patch.object(di.ctypes.windll.user32, 'GetWindowRect',
fake_get_window_rect), \
mock.patch.object(di.ctypes.windll.user32, 'GetWindowTextW'):
with mock.patch.object(di, 'foreground_window', return_value=12345), \
win_api(GetWindowRect=window_rect(0, 0, 50, 50)):
ok, why = di.click_point_is_on_foreground(999, 999)
self.assertFalse(ok)
self.assertIn('不在前台窗口内', why)
def test_accepts_when_point_inside_foreground_window(self):
def fake_get_window_rect(hwnd, ptr):
r = ptr._obj
r.left, r.top, r.right, r.bottom = 0, 0, 1920, 1080
return 1
with mock.patch.object(di.ctypes.windll.user32, 'GetForegroundWindow',
return_value=12345), \
mock.patch.object(di.ctypes.windll.user32, 'GetWindowRect',
fake_get_window_rect):
with mock.patch.object(di, 'foreground_window', return_value=12345), \
win_api(GetWindowRect=window_rect(0, 0, 1920, 1080)):
ok, why = di.click_point_is_on_foreground(500, 500)
self.assertTrue(ok)
self.assertEqual(why, 'ok')
@@ -553,30 +571,29 @@ class HwndForegroundCheckTest(unittest.TestCase):
"""
def test_accepts_when_foreground_is_the_target(self):
with mock.patch.object(di.ctypes.windll.user32, 'GetForegroundWindow',
return_value=999):
with mock.patch.object(di, 'foreground_window', return_value=999):
ok, why = di.click_point_is_on_foreground(100, 100, 999)
self.assertTrue(ok)
self.assertEqual(why, 'ok')
def test_accepts_child_window_of_target(self):
"""游戏可能有子窗口拿到焦点, 也算在目标窗口上。"""
with mock.patch.object(di.ctypes.windll.user32, 'GetForegroundWindow',
return_value=1000), \
mock.patch.object(di.ctypes.windll.user32, 'IsChild',
return_value=True):
is_child = mock.Mock(return_value=True)
with mock.patch.object(di, 'foreground_window', return_value=1000), \
win_api(IsChild=is_child):
ok, _ = di.click_point_is_on_foreground(100, 100, 999)
is_child.assert_called_once_with(999, 1000)
self.assertTrue(ok)
def test_rejects_when_foreground_is_another_window(self):
with mock.patch.object(di.ctypes.windll.user32, 'GetForegroundWindow',
return_value=1000), \
mock.patch.object(di.ctypes.windll.user32, 'IsChild',
return_value=False), \
mock.patch.object(di.ctypes.windll.user32, 'GetWindowTextW'):
titles = {1000: 'Browser', 999: 'LimbusCompany'}
with mock.patch.object(di, 'foreground_window', return_value=1000), \
win_api(IsChild=mock.Mock(return_value=False)), \
mock.patch.object(di, 'window_title', side_effect=titles.get):
ok, why = di.click_point_is_on_foreground(100, 100, 999)
self.assertFalse(ok)
self.assertIn('前台不是目标窗口', why)
self.assertIn('Browser', why)
def test_bind_window_is_used_by_click(self):
"""绑定窗口后, click() 必须走句柄级校验。"""
@@ -596,4 +613,19 @@ class HwndForegroundCheckTest(unittest.TestCase):
mock.patch.object(di.time, 'sleep', lambda s: None):
self.assertFalse(d.click(10, 10))
self.assertEqual(seen['hwnd'], 4242, 'click 没把绑定的句柄传下去')
d._dll.mouse_down.assert_not_called()
d._dll.mouse_down.assert_not_called()
def test_proxy_rebinds_current_window_before_each_click(self):
"""游戏重启后句柄会变; 代理复用时若仍拿安装时的旧句柄, 前台校验会拒绝所有点击。"""
drv = di.DriverInput(dll_path='X.dll', log=lambda m: None).bind_window(111)
handle = SimpleNamespace(hwnd=222, isMinimized=False, setForeground=mock.Mock())
proxy = ap.DriverClickProxy(mock.Mock(), drv, SimpleNamespace(handle=handle), log=lambda _: None)
with mock.patch.object(di, 'is_console_session', return_value=True), \
mock.patch.object(di, 'foreground_window', return_value=222), \
mock.patch.object(di, 'client_to_screen', return_value=(5, 6)):
self.assertEqual(proxy._screen_pos(1, 2), (5, 6))
self.assertEqual(drv.hwnd, 222)
if __name__ == '__main__':
unittest.main()
+145 -32
View File
@@ -9,9 +9,12 @@
实现上踩过一个坑: 先用了 pynput 的 GlobalHotKeys, 静态注册成功、线程也活着, 但
keybd_event 和 SendInput 两种注入都触发不了它 —— 钩子在当前会话下收不到键。
改成 GetAsyncKeyState 轮询后实测可用。这里的测试守住轮询方案的几个关键性质。
改成 GetAsyncKeyState 轮询后实测可用。这里的测试守住轮询方案的几个关键性质,
以及急停时"先放开鼠标、卡住也按时退出"的保证。
"""
import sys
import tempfile
import threading
import unittest
from pathlib import Path
from unittest import mock
@@ -19,10 +22,16 @@ from unittest import mock
sys.path.insert(0, str(Path(__file__).resolve().parents[1]))
from lc_mcp import killswitch # noqa: E402
PRESSED = -32768 # SHORT 0x8000: GetAsyncKeyState 的"当前按下"位
def key_state(value):
return mock.patch.object(killswitch, '_key_state_api', return_value=lambda vk: value)
class ResolveVkTest(unittest.TestCase):
"""键名解析必须严格: 认不出来要返回 None, 不能悄悄用默认值 ——
否则用户以为设成了 F11, 实际还在监听 F12。"""
否则用户以为设成了 F11, 实际还在监听别的键。"""
def test_common_keys(self):
self.assertEqual(killswitch.resolve_vk('f12'), 0x7B)
@@ -30,6 +39,10 @@ class ResolveVkTest(unittest.TestCase):
self.assertEqual(killswitch.resolve_vk('esc'), 0x1B)
self.assertEqual(killswitch.resolve_vk('pause'), 0x13)
def test_default_is_end_not_steam_screenshot_key(self):
self.assertEqual(killswitch.DEFAULT_KEY, 'end')
self.assertEqual(killswitch.resolve_vk(None), 0x23)
def test_accepts_angle_brackets(self):
self.assertEqual(killswitch.resolve_vk('<f12>'), 0x7B)
@@ -37,14 +50,15 @@ class ResolveVkTest(unittest.TestCase):
self.assertEqual(killswitch.resolve_vk(' F12 '), 0x7B)
def test_empty_uses_default(self):
self.assertEqual(killswitch.resolve_vk(''), killswitch.VK[killswitch.DEFAULT_KEY])
self.assertEqual(killswitch.resolve_vk(None), killswitch.VK[killswitch.DEFAULT_KEY])
for key in ('', None, ' '):
self.assertEqual(killswitch.resolve_vk(key), killswitch.VK[killswitch.DEFAULT_KEY])
def test_unknown_returns_none(self):
self.assertIsNone(killswitch.resolve_vk('nosuchkey'))
class InstallTest(unittest.TestCase):
"""装不上不能把任务带崩,但必须说清楚怎么应急。"""
def test_reports_unknown_key_and_suggests_fallback(self):
lines = []
@@ -54,24 +68,35 @@ class InstallTest(unittest.TestCase):
self.assertIn('认不出键名', joined)
self.assertIn('Ctrl+Alt+Del', joined, '必须给出应急手段')
def test_reports_when_keyboard_api_is_unavailable(self):
lines = []
with mock.patch.object(killswitch, '_key_state_api', side_effect=AttributeError('no user32')):
got = killswitch.install(log=lines.append)
self.assertIsNone(got)
joined = '\n'.join(lines)
self.assertIn('急停热键不可用', joined)
self.assertIn('Ctrl+Alt+Del', joined)
def test_installs_and_logs_the_key(self):
lines = []
with mock.patch.object(killswitch.KillSwitch, 'start', lambda self: self):
with key_state(0), mock.patch.object(killswitch.KillSwitch, 'start', lambda self: self):
switch = killswitch.install(log=lines.append, key='f11')
self.assertIsInstance(switch, killswitch.KillSwitch)
self.assertEqual(switch.vk, 0x7A)
self.assertIn('F11', '\n'.join(lines))
joined = '\n'.join(lines)
self.assertIn('F11', joined)
self.assertIn('游戏窗口保留', joined)
def test_env_var_overrides_default(self):
with mock.patch.dict(killswitch.os.environ, {'LCP_KILL_KEY': 'esc'}), \
with mock.patch.dict(killswitch.os.environ, {'LCP_KILL_KEY': 'esc'}), key_state(0), \
mock.patch.object(killswitch.KillSwitch, 'start', lambda self: self):
switch = killswitch.install(log=lambda m: None)
self.assertEqual(switch.vk, 0x1B)
def test_start_failure_is_reported_not_raised(self):
lines = []
with mock.patch.object(killswitch.KillSwitch, 'start',
side_effect=RuntimeError('boom')):
with key_state(0), mock.patch.object(killswitch.KillSwitch, 'start',
side_effect=RuntimeError('boom')):
got = killswitch.install(log=lines.append)
self.assertIsNone(got)
self.assertIn('启动失败', '\n'.join(lines))
@@ -81,60 +106,148 @@ class PollingTest(unittest.TestCase):
"""轮询判断的核心:0x8000 位。测错位会导致"一直触发"或"永不触发"。"""
def test_high_bit_means_pressed(self):
with mock.patch.object(killswitch.ctypes.windll.user32, 'GetAsyncKeyState',
return_value=0x8000):
self.assertTrue(killswitch._pressed(0x7B))
for value in (PRESSED, PRESSED | 1):
with self.subTest(value=value), key_state(value):
self.assertTrue(killswitch._pressed(0x7B))
def test_low_bits_are_not_pressed(self):
# 0x0001 表示"上次调用后被按过", 不代表当前按住 —— 不能当成按下
with mock.patch.object(killswitch.ctypes.windll.user32, 'GetAsyncKeyState',
return_value=0x0001):
with key_state(0x0001):
self.assertFalse(killswitch._pressed(0x7B))
def test_zero_is_not_pressed(self):
with mock.patch.object(killswitch.ctypes.windll.user32, 'GetAsyncKeyState',
return_value=0):
with key_state(0):
self.assertFalse(killswitch._pressed(0x7B))
def test_poll_thread_fires_on_press(self):
sw = killswitch.KillSwitch(0x23, log=lambda m: None)
exited = threading.Event()
with key_state(PRESSED), mock.patch.object(killswitch, 'START_DELAY', 0), \
mock.patch.object(killswitch.os, '_exit', side_effect=lambda code: exited.set()):
sw.start()
self.assertTrue(exited.wait(2))
sw._thread.join(2)
self.assertTrue(sw.fired)
def test_broken_api_stops_polling_with_a_message(self):
lines = []
sw = killswitch.KillSwitch(0x23, log=lines.append)
with mock.patch.object(killswitch, '_key_state_api', side_effect=OSError('gone')), \
mock.patch.object(killswitch, 'START_DELAY', 0), \
mock.patch.object(killswitch.os, '_exit') as fake_exit:
sw.start()
sw._thread.join(2)
self.assertFalse(sw.is_alive())
fake_exit.assert_not_called()
self.assertIn('急停热键失效', '\n'.join(lines))
class FireTest(unittest.TestCase):
def _switch(self):
return killswitch.KillSwitch(0x7B, log=lambda m: None, key_name='f12')
def _switch(self, log=lambda m: None, on_stop=None):
return killswitch.KillSwitch(0x23, log=log, key_name='end', on_stop=on_stop)
def test_exits_with_user_abort_code(self):
def test_exits_with_user_abort_code_and_only_fires_once(self):
sw = self._switch()
with mock.patch.object(killswitch.os, '_exit') as fake_exit:
sw._fire()
sw._fire()
sw._fire()
fake_exit.assert_called_once_with(killswitch.EXIT_CODE)
def test_only_fires_once(self):
sw = self._switch()
with mock.patch.object(killswitch.os, '_exit') as fake_exit:
sw._fire()
sw._fire()
sw._fire()
self.assertEqual(fake_exit.call_count, 1, '重复触发不该重复退出')
def test_logs_that_game_is_kept(self):
lines = []
sw = killswitch.KillSwitch(0x7B, log=lines.append, key_name='f12')
with mock.patch.object(killswitch.os, '_exit'):
sw._fire()
self._switch(log=lines.append)._fire()
joined = '\n'.join(lines)
self.assertIn('F12', joined)
self.assertIn('END', joined)
self.assertIn('重新开始', joined)
def test_releases_input_before_logging_and_exiting(self):
calls = []
sw = self._switch(log=lambda m: calls.append('log'), on_stop=lambda: calls.append('release'))
with mock.patch.object(killswitch.os, '_exit', side_effect=lambda code: calls.append(code)):
sw._fire()
self.assertEqual(calls, ['release', 'log', 130])
def test_broken_cleanup_or_log_cannot_disable_the_hotkey(self):
def cleanup():
raise OSError('driver disconnected')
log = mock.Mock(side_effect=OSError('closed log'))
with mock.patch.object(killswitch.os, '_exit') as fake_exit:
self._switch(log=log, on_stop=cleanup)._fire()
fake_exit.assert_called_once_with(130)
def test_hung_cleanup_cannot_block_exit_deadline(self):
release, exited = threading.Event(), threading.Event()
sw = self._switch(on_stop=release.wait)
with mock.patch.object(killswitch.os, '_exit', side_effect=lambda code: exited.set()):
worker = threading.Thread(target=sw._fire, daemon=True)
worker.start()
try:
self.assertTrue(exited.wait(2), '清理卡住也必须触发强退')
finally:
release.set()
worker.join(2)
def test_real_emergency_exit_is_reported_as_stopped(self):
from lc_mcp.tasks import TaskRunner
child = """
import json, os, time
from lc_mcp import killswitch
from lc_mcp.aalc_task import RESTORE_ENV
with open(os.environ[RESTORE_ENV], 'w') as f: json.dump({'set_mirror_count': 1}, f)
killswitch._key_state_api = lambda: (lambda vk: -32768)
killswitch.install(log=lambda msg: None)
time.sleep(10)
"""
with tempfile.TemporaryDirectory() as tmp:
runner = TaskRunner(tmp, argv_factory=lambda t, p: [sys.executable, '-c', child])
self.assertTrue(runner.start('mirror', {'count': 2})['ok'])
self.addCleanup(runner.proc.kill)
runner.proc.wait(timeout=5)
status = runner.status()
self.assertEqual((status['state'], status['exit_code']), ('stopped', 130))
self.assertTrue(status['pending_restore'], '强退保留配置恢复文件, 下次启动前由服务处理')
class StopTest(unittest.TestCase):
def test_stop_is_safe_on_none(self):
killswitch.stop(None)
killswitch.stop(None) # 不该抛
def test_stop_calls_switch(self):
sw = mock.Mock()
killswitch.stop(sw)
sw.stop.assert_called_once()
def test_stop_swallows_errors(self):
sw = mock.Mock()
sw.stop.side_effect = RuntimeError('boom')
killswitch.stop(sw)
killswitch.stop(sw) # 不该抛
def test_stopped_switch_does_not_poll(self):
sw = killswitch.KillSwitch(0x23, log=lambda m: None)
with key_state(PRESSED), mock.patch.object(killswitch.os, '_exit') as fake_exit:
sw.stop()
sw.start()
sw._thread.join(2)
fake_exit.assert_not_called()
def test_listening_passes_cleanup_and_stops_on_return_and_exception(self):
cleanup = object()
for failure in (False, True):
switch = mock.Mock()
with self.subTest(failure=failure), \
mock.patch.object(killswitch, 'install', return_value=switch) as install:
try:
with killswitch.listening(on_stop=cleanup):
if failure:
raise RuntimeError('task failed')
except RuntimeError:
pass
self.assertIs(install.call_args.kwargs['on_stop'], cleanup)
switch.stop.assert_called_once()
if __name__ == '__main__':